logo-polimi
Loading...
Risorse bibliografiche
Risorsa bibliografica obbligatoria
Risorsa bibliografica facoltativa
Scheda Riassuntiva
Anno Accademico 2019/2020
Scuola Scuola di Ingegneria Industriale e dell'Informazione
Insegnamento 095910 - FUNDAMENTALS OF CHEMICAL PROCESSES
Docente Groppi Gianpiero
Cfu 8.00 Tipo insegnamento Monodisciplinare

Corso di Studi Codice Piano di Studio preventivamente approvato Da (compreso) A (escluso) Insegnamento
Ing Ind - Inf (Mag.)(ord. 270) - BV (477) ENERGY ENGINEERING - INGEGNERIA ENERGETICA*AZZZZ095910 - FUNDAMENTALS OF CHEMICAL PROCESSES
053899 - FUNDAMENTALS OF CHEMICAL PROCESSES B

Obiettivi dell'insegnamento

Aim of the course is to provide the fundamental knowledge on thermodynamics and kinetics of chemical reactions which is required for the rational design of chemical processes relevant to the energy industry. The course will also provide the fundamentals of multiphase-multicomponent equilibria involving ideal and real mixtures.

 


Risultati di apprendimento attesi

As expected learning targets the students must:

 

demonstrate fundamental knowledge and understanding of thermodynamic and kinetic principles for the rational design of  chemical processes and unit operations as well as the kowledge and understanding of thermodynamics principles of multiphase-multicomponent equilibria;

 

be able to apply their knowledge and understanding to perform the quantitative analysis of chemical processes by solving problems which involve mass and energy balances combined with stoichiometry (e.g. combustion), chemical equilibrium (e.g. syngas production) and multiphase equilibrium equations;

 

show to have the learning skills which will allow them to autonomously develop and apply the basic concepts they assimilated in the course. 


Argomenti trattati

1. Mass and energy balances in reacting systems under stoichiometric control (combustion). Stoichiometry of chemical reactions. Mass balances in chemical processes under stoichiometric control. Reaction Stoichiometry of chemical reactions. Mass balances in chemical processes under stoichiometric control. Reaction coordinate and extent of reaction, conversion, selectivity and yield. Thermochemistry of combustion reactions. Calorific value of fuels and reaction enthalpy. Hess law. Energy balances in combustion processes. Adiabatic flame temperature. Combustion efficiency.

2. Chemical equilibrium. Equilibrium condition for reacting systems. Gibbs free energy and chemical potential. Fugacity, activity and reference states for pure species and mixtures of gases, liquids and solids. Standard Gibbs free energy and equilibrium constants. Temperature and pressure effects on equilibrium composition: Kirchhoff law and Van’t Hoff equation. Mass and energy balances in simple and complex reacting systems under equilibrium conditions. Thermodynamic analysis of chemical processes for the production of hydrogen.

3. Phase equilibria in multicomponent systems. Introduction to phase equilibria: Phase equilibrium equation, phase rule and Duhem’s theorem; qualitative behavior of Vapor Liquid Equilibrium (VLE). Bubble point and dew point curves. Azeotropes. VLE for ideal systems. Raoult law and Henry law. Isothermal and adiabatic flash. Ideal and real mixtures. Residual properties and excess properties: relation with fugacity (φ) and activity (γ) coefficients. γ/φ methods and φ/φ methods for VLE calculations. Equations of state: virial equations, cubic equations (VdW, RKS, PR), corresponding state law. Calculation of fugacity coefficients from cubic equations of state. Empirical model for calculation of activity coefficients in binary liquid mixtures: Margules and Van Laar equations. Introduction to multicomponent liquid mixtures: Wilson equation. Introduction to liquid-liquid equilibrium. Stability criteria. Heterogeneous azeotropes.

4. Chemical kinetics. Reaction rate and rate equation: Arrhenius law and reaction orders. Overall stoichiometry and elementary reactions. Examples of reaction mechanisms as sequence of elementary reactions: radical chain reactions and Pseudo steady state approximation. Kinetics of catalytic reactions: adsorption/desorption model, rate determining step. Langmuir-Hinshelwood-Hougen-Watson model. Ideal reactors: Continuously Stirred Tank Reactor; Perfectly Mixed Batch Reactor; Plug Flow Reactor.

5. Fuel cells. Thermodynamic and kinetic principles of fuel cell operations. Anodic and cathodic reactions in different fuel cells. Nernst Law, Tafel Law and polarization curve. Voltage and current efficiency.


Prerequisiti

No prerequisites.


Modalità di valutazione

The final exam will consist of a written test and an oral examination.

 

In the written test the students must demonstrate to be able to apply their knowledge and understanding to perform the quantitative analysis of chemical processes by solving problems which involve mass and energy balances combined with stoichiometry (e.g. combustion), chemical equilibrium and multiphase equilibrium equations.

Admission to the following oral examination will require a positive evaluation of the written test (>= 18).

 

In the oral test the students must demonstrate fundamental knowledge and understanding of thermodynamic and kinetic principles for the rational design of  chemical processes and unit operations as well as the kowledge and understanding of thermodynamics principles of multiphase-multicomponent equilibria.  

In case of positive evaluation of the oral exam (>=18), the final grade wil be obtained as a weighted average of the evaluations of the written test and the oral exam. 


Bibliografia
Risorsa bibliografica facoltativaJ.M. Smith, H.C. Van Ness, M. M. Abbott., Introduction to Chemical Engineering Thermodynamics, 7th edition, Editore: McGraw Hill, Anno edizione: 2005
Risorsa bibliografica facoltativaR.M. Felder, R.W. Rousseau., Elementary Principles of Chemical Processes, 3rd Ed., Editore: Wiley, Anno edizione: 2000
Risorsa bibliografica facoltativaLecture notes
Note:

Available on-line through the BeeP Website


Forme didattiche
Tipo Forma Didattica Ore di attività svolte in aula
(hh:mm)
Ore di studio autonome
(hh:mm)
Lezione
48:00
72:00
Esercitazione
32:00
48:00
Laboratorio Informatico
0:00
0:00
Laboratorio Sperimentale
0:00
0:00
Laboratorio Di Progetto
0:00
0:00
Totale 80:00 120:00

Informazioni in lingua inglese a supporto dell'internazionalizzazione
Insegnamento erogato in lingua Inglese
Disponibilità di materiale didattico/slides in lingua inglese
Disponibilità di libri di testo/bibliografia in lingua inglese
Possibilità di sostenere l'esame in lingua inglese
schedaincarico v. 1.6.1 / 1.6.1
Area Servizi ICT
02/04/2020