Ing Ind - Inf (Mag.)(ord. 270) - MI (474) TELECOMMUNICATION ENGINEERING - INGEGNERIA DELLE TELECOMUNICAZIONI
094791 - MICROWAVE ENGINEERING
Ing Ind - Inf (Mag.)(ord. 270) - MI (476) ELECTRONICS ENGINEERING - INGEGNERIA ELETTRONICA
094791 - MICROWAVE ENGINEERING
The aim of the course is to introduce the techniques suitable for the design of microwave circuits and components, starting from the basic knowledge on ideal lines and electromagnetics. These techniques are required by the distributed nature of the circuits, usually of phisycal dimensions much larger than the operational wavelength. Modern planar structures will be considered in particular, focusing on the practical design of passive circuits like matching networks, couplers and dividers, filters, etc.
Risultati di apprendimento attesi
Lectures and exercise sessions will allow students to:
- design microwave circuits of passive type by ideal equivalent circuits;
- convert them into phisical planar circuits;
- model and compensate discontinuity effects with the aid of proper CAD software.
Introduction. Circuit components from the electromagnetic point of view, distributed- vs lumped-parameter circuits.
Guiding structures. V/I waves in transmission lines. E/H waves in uniform structures with ideal conductors: TEM, TE/TM and hybrid modes; fundamental and higher order modes (recalls). Transmission lines of planar type: stripline, microstrip, slotline, coplanar waveguide, etc.; quasi-TEM approximation, effective dielectric constant, frequency dependence of line parameters (dispersion), losses.
Microwave junctions. Definition of junction and port: equivalent voltages and currents, normalized waves, reference planes. Matrix description of linear n-port junctions: S matrix, general properties, properties for reciprocal and lossless junctions, change of reference planes, relation to Z/Y matrices. ABCD matrix for cascaded 2-ports. Derivation of the equivalent circuit for n-port junctions and discontinuities by lumped elements and ideal lines.
Microwave circuits. The interconnection of lengths of guiding structures by junctions: modeling of discontinuities, higher-order mode interaction, introduction to CAD software.
Matching netwoks. Narrow and broad band matching: single and double stub, single and multiple quarter-wavelength transformers, frequency response, design examples.
Couplers and dividers. Wilkinson coupler. Directional couplers and hybrids: directivity and isolation, even and odd modes in coupled lines, design examples.
Resonators. Free and forced oscillations, external and inter-resonator couplings, the equivalent circuit of loaded resonators, impedance/admittance inverters.
Filters. The design technique by insertion-loss method: lowpass prototype filter; scaling and frequency mapping for lowpass, bandpass and stopband filters. Design examples (lowpass filters, coupled-lines bandpass filters, etc.)
Students are assumed to have attended basic courses on electromagnetcs (including in particular ideal lines and guided propagation) and circuit theory.
Modalità di valutazione
The final evaluation is preferably based on the design of a microwave circuit, both theoretical and assisted by CAD software, to be choosen in agreement with the teacher. Oral form is accepted.
David. M. Pozar, Microwave Engineering, 4.th Edition, Editore: John WIley & Sons., Anno edizione: 2011, ISBN: 978-0-470-63155-3
Tipo Forma Didattica
Ore di attività svolte in aula
Ore di studio autonome
Laboratorio Di Progetto
Informazioni in lingua inglese a supporto dell'internazionalizzazione
Insegnamento erogato in lingua
Disponibilità di libri di testo/bibliografia in lingua inglese
Possibilità di sostenere l'esame in lingua inglese
Disponibilità di supporto didattico in lingua inglese